The best lighting vendor will tell you what they don't do
I have a two-question test for any lighting vendor who wants our commercial account. First question: what's your lead time on a standard strip LED order? Second: what don't you guys do? The ones who stumble on the second question are the ones I stop calling. The ones who answer it clearly—and a few have told me point blank "we're not the right fit for custom entrance chandeliers, talk to an architectural outfit"—are the ones I trust for everything else. In 2024, I walked away from a vendor quoting 22% below our incumbent because he couldn't name a single thing his company was bad at. That's not confidence. That's a script.
Look, I'm not a lighting designer. I'm the office administrator for a 220-person company spread across three buildings in the Southeast. I manage facilities spend—roughly $185K annually across 11 vendors—and I report to both our VP of Operations and our controller. Lighting is maybe 15% of that spend, but it's the category where I've seen the most misrepresentation, mostly because most of us buying it don't know enough to push back. So here's what five years of POs, plant visits, and one truly stupid grow-light mistake taught me about separating real suppliers from good salespeople.
Why the "we do everything" pitch should make you nervous
It's tempting to think a full-service lighting partner saves you time—one call, one invoice, one relationship. But the "one vendor for everything" advice ignores how differently fixtures, controls, and agricultural grow lights are engineered, sourced, and warrantied. From the outside, a company selling commercial troffers, DTL photocontrols, and hydroponic grow bars looks diversified. The reality is that the last category alone involves PAR spectrum tuning, thermal management, and driver topologies that have almost nothing in common with a parking-lot photocell.
That came home to me in early 2024 when a colleague in our ag-sciences division asked me to source grow lights for a small research bay. I'd been buying strip LEDs for under-cabinet and cove lighting for two years, so I figured—naively—that lights are lights. It's tempting to think a good strip LED vendor can handle a grow light order. But the spectrum requirements, the required PPFD values at canopy height, and the heat load per square foot are a different problem entirely. My first quote came back from a general lighting supplier at $1,100 for six fixtures. When I sent the same spec to a horticultural lighting specialist, they quoted $1,720—and then spent twenty minutes on the phone explaining why the cheaper fixtures would underperform in a 12-hour photoperiod and why my heat load assumption was off by roughly 40%. The cheaper quote wasn't cheaper. It was just less informed.
"The vendor who says 'this isn't our strength—here's who does it better' earns my trust for everything else."
How I actually verify a lighting supplier now
Here's my checklist, in order. I run it before the first RFQ, not after.
- Verify the manufacturing footprint. Acuity Brands, for instance, publicly lists facilities including Crawfordsville, Indiana and Conyers, Georgia. When I can confirm a supplier's stated locations against public records or a site visit, I know the lead-time promises are grounded in something. When I can't, I assume the inventory is brokered.
- Ask what they source out. Every legit manufacturer buys some components. The honest ones tell you which ones. The ones who claim vertical integration across a catalog that spans controls, fixtures, and replacement parts—that's a red flag.
- Get one weird request in writing. For us, it was a commercial entrance chandelier for the lobby refresh. I asked three vendors for a written scope. Two came back with vague "we can do that" language. One came back with a two-paragraph note explaining that custom chandeliers were outside their wheelhouse and recommending two architectural lighting firms. That third vendor now handles our strip LED and replacement-parts orders.
- Check the controls conversation. If a supplier can't explain the difference between a DTL dark-to-light photocontrol and a standard time-clock, they're reselling boxes they don't understand. That matters when the install goes wrong and I'm the one stuck explaining it to facilities.
Bottom line: the vendors who can articulate their limits are almost always the ones who also know their products deeply. It's the inverse of what the sales decks suggest.
Where the "specialist only" rule breaks down
I should be honest about the limits of my own advice. There are genuine cases where a single-source lighting partner is the right call—large multi-site rollouts with standardized specs, for instance, where the cost of coordinating three vendors outweighs the risk of one overpromising. We ran into this when we consolidated ordering across our three buildings in 2023; dealing with four separate lighting suppliers for ten SKUs was creating more invoice errors than it was saving us in unit price. And not every specialist is good. I've had horticultural growers quote me twice industry average and miss the delivery window. Specialization is a signal, not a guarantee.
The point isn't to avoid anyone who sells more than one thing. It's to distrust anyone who can't tell you, specifically, which thing they're worse at. That's the tell. If I could redo one decision from 2024, I'd have asked the grow-light question before I placed the strip LED order—not after. Given what I knew then, though, my mistake was reasonable. I just didn't know yet that a vendor's honesty about its boundaries is the cheapest quality-control tool a buyer has.